You want a fence that gives you privacy without another staining job, but the vinyl quotes look nothing alike. One may be for solid backyard panels and another for a shorter, open picket design.
So Level Up Concrete & Landscape in Utah’s Salt Lake Valley publishes $32 to $50 per linear foot installed for six-foot privacy vinyl. Its four-foot picket style is $26 to $40 per foot.
I checked the prices on October 25, 2026. I will compare the styles, work through a fence-and-gate example and explain the post and hardware details I would want settled before installation.
Vinyl Fence Prices by Style
Level Up’s 2026 Salt Lake Valley menu gives these installed ranges. Compare the height and style as well as the price.
Choose the purpose first. A ranch fence marks a line without making a solid screen. A privacy panel blocks the view; pickets leave gaps between the uprights.
For a pool enclosure, have the required barrier design confirmed before selecting from a style chart. A fence advertised as picket does not, by itself, establish that its gaps, height and gate suit your pool.
A Fence and Walk Gate Example
Level Up’s single walk gate is $350 to $700 with hardware and a stiffener included. Its double drive gate is $700 to $1,600, depending on width and reinforcement.
Suppose you need 100 feet of fixed six-foot privacy fence plus a separate walk-gate opening. At Level Up’s rates, the fixed sections work out to 100 x $32 = $3,200 through 100 x $50 = $5,000.
That calculation leaves removal, local approvals and difficult-site work to the actual proposal. It assumes 100 feet of fixed panels in addition to the gate, so the gate opening is not charged as fixed fencing too.
Decide what needs to fit through before the posts are placed. A mower, bins and a vehicle need different clear openings, and the gate needs room to swing without hitting the ground or nearby planting.
Look Beyond the White Panels
Level Up describes heavy-wall vinyl and internal aluminum stiffeners in gate posts and long-span rails. Adjustable hinges and hardware matched to the panel weight are also part of its stated installation specification.
Ask for the product line, post type, rail construction and gate reinforcement in the order. Two fences can look similar from the sidewalk while using different supporting parts.
The post foundations need to suit your site. Level Up describes its own Utah setting depths, but that local specification is not a footing design for every soil, climate or fence product.
Barrette Outdoor Living publishes separate instructions for picket panels, privacy panels and gates. Have the installer use the instructions for your selected system.
Older Owner Quotes and a Later Repair Bill
The Garage Journal examples below are US accounts with different scopes. The installation estimates are old; the repair bill helps explain why support and workmanship terms matter.
- On March 8, 2015, Southern California member Vandals909 received about $9,500 for 338 feet of vinyl fencing, installed with old-fence removal. The owner was still comparing products.
- On April 23, 2010, Palmer, Alaska member nate379 was looking at close to $30,000 to fence the yard in vinyl. The post gives no fence length or itemized bid, so it cannot supply a per-foot rate.
- On April 1, 2017, Morris County, New Jersey member Stevedore recalled a $600 charge to reset heaved posts after an earlier white-vinyl installation. The number of repaired posts is not specified.
The New Jersey owner did not establish why the posts moved. I would use that account to ask who handles later post movement or gate adjustment, rather than to diagnose a problem from a forum post.
Old Fences, Slopes and the Fence Line
Level Up prices old-fence removal and haul-off at $3 to $8 per linear foot. It also describes removal as included in the written quote, so check whether the total already contains that line before adding it again.
For a broader replacement project, my fence replacement guide covers removing old posts, shared boundaries and comparing other materials. This guide’s figures come from the separate vinyl installation menu.
On sloping ground, ask the installer to show how the panels will meet the ground and what gaps will remain. The chosen panel system and gate location need to work with that layout.
Confirm the boundary and any local or association approvals before ordering. Level Up includes utility location before digging; have your installer explain how it will arrange the required markings for your address.
Before Paying the Deposit
Keep the material warranty separate from the installer’s workmanship terms.
Vinyl Fence Installation Questions
How much does a six-foot vinyl privacy fence cost installed?
Level Up’s Salt Lake Valley menu gives $32 to $50 per linear foot. Gates, removal and the site’s installation conditions need to be identified in the final proposal.
What does 100 feet of vinyl fence plus a gate cost?
At Level Up’s privacy rates, 100 feet is $3,200 to $5,000. Adding its walk-gate range gives $3,200 + $350 = $3,550 through $5,000 + $700 = $5,700, with removal and other separately priced work excluded.
Is a white vinyl panel price the whole installed fence price?
A panel-only purchase can leave posts, caps, reinforcement, concrete, gates and labor to be supplied. The prices in Level Up’s style table are installed ranges rather than retail panel prices.
Can I use the same vinyl style everywhere around the yard?
Have the layout checked for slopes, gates and the purpose of each run. A privacy screen, an open boundary fence and a pool barrier can need different designs and approvals.
Where These Prices Come From
Checked October 25, 2026. Current prices are one Utah installer’s ranges; the community accounts retain their 2010, 2015 and 2017 dates.
- Level Up Concrete & Landscape: Salt Lake Valley styles, gates, removal and installation details.
- Barrette Outdoor Living: product-specific installation resources.
- The three dated Garage Journal accounts linked above.
I hope this helps you choose a vinyl fence and understand the work behind it. You can share a recent US installation quote at costcheckr@gmail.com.
