You want to add an appliance, but the electrician is talking about replacing the panel first. Before agreeing, find out whether the panel is damaged, the service lacks capacity or the job simply needs more circuit space.
So electrical panel replacement costs $1,800 to $3,000 in Super Power Electric’s Red Bank, New Jersey, range for a Federal Pacific or Zinsco panel at the same amperage. Its panel-and-200-amp-service upgrade is $2,500 to $4,500.
I have separated those jobs below, with another electrician’s prices and two homeowner accounts. You can then see which work your estimate actually buys.
Replacing the Panel or Increasing the Service?
A same-amperage replacement changes the panel assembly without increasing the home’s service capacity. Super Power’s lower range assumes the existing service entrance is sound and adequate for the house.
A service upgrade reaches further. Super Power’s larger package includes a 200-amp panel, service entrance cable, meter base, weatherhead, grounding and new breakers.
Neither description means that every wire in the house is being replaced. A whole-house rewire is a separate scope, even when a panel is installed during the same project.

If the diagnosis is one failed breaker, our circuit breaker replacement guide covers that repair. Have the electrician explain what finding makes a complete panel necessary.
Published Prices From Two Electricians
Cob Services describes its ranges as based on local jobs in 2025 and 2026. Its price can rise for panel relocation, meter work or grounding changes.
These businesses price whole projects. Do not add a separate hourly allowance or a shopping-cart panel price unless your proposal explicitly leaves those costs out.
Super Power’s additional-work range is an alternative project tier. It is not an extra amount to add automatically to the company’s standard upgrade range.

How Much Capacity Do You Need?
For an EV charger, the Electrical Safety Foundation recommends a home evaluation by a licensed, qualified professional. It separates the utility service, panel and home wiring as parts of that assessment.
Tell the electrician about the appliances you have and what you intend to add. Request the load assessment and proposed service rating rather than choosing a bigger panel by the number of empty slots.
A subpanel gives circuits another distribution point. It does not, by itself, increase the capacity of the utility service feeding the house.
What Homeowners Paid
These TexAgs members described completed work in Dallas and East Dallas in November 2022.
- November 19, 2022, 10:35 a.m.: HouseDivided06 paid $3,500 in Dallas to move a Federal Pacific panel from a closet to an outside wall and go from 150 to 200 amps.
- November 19, 2022, 1:21 p.m.: mts6175 reported $15,000 in East Dallas for a complete rewire, new panel and changed service during a remodel. The panel was only part of the project.
The relocation and rewire explain much of the difference between the first two jobs. I would compare a proposal with its matching scope instead of using the cheapest historical bill as a target.
What Belongs on the Estimate?
Ask for a description that follows the power from the utility connection through the panel. That makes it easier to see whether an apparently low panel price leaves service work for another bill.
- The panel’s make, rating, circuit spaces and included breakers.
- Any meter base, service entrance, mast or feeder replacement.
- Grounding, bonding, surge protection and other protection required for the work.
- Permit handling, inspection and utility disconnect and reconnect arrangements.
- Panel relocation, wire extensions and repairs to walls or finishes.
- Testing, circuit labeling, cleanup and the installation warranty.
Have the electrician identify local permit and inspection requirements for the actual project. The Electrical Safety Foundation notes that these can apply when preparing a house for EV charging.
Also ask which costs are allowances and how hidden damage will be approved. An existing wall may conceal work that cannot be confirmed from the front of the panel.
Plan for the Power to Be Off
Cob Services warns that the house will be without power during the changeover, including the refrigerator and freezer. Confirm the expected outage and the utility schedule before choosing the work day.
Arrange backup for equipment that must stay powered. If your plan includes a generator connection, have that equipment and its installation named in the scope rather than assuming it comes with a larger panel.
Keep the panel cover in place while comparing quotes. This is work for a qualified electrician; the price discussion does not require you to inspect exposed wiring.
Electrical Panel Replacement Questions
Can I Replace a Panel Without Increasing the Amperage?
Yes. Super Power Electric publishes a same-amperage replacement range when the service entrance is in good condition and the existing capacity meets the home’s needs.
Does a 200-Amp Panel Quote Include the Meter Base?
Only if the scope includes it. Super Power’s panel-and-service package names the meter base and entrance equipment. A panel-only swap is a different job.
Does Adding a Subpanel Increase My Service Capacity?
No. It provides another place to distribute circuits. The electrician still needs to assess whether the existing service can support the planned loads.
Is Replacing the Panel the Same as Rewiring the House?
No. A rewire changes the house wiring as specified. The East Dallas homeowner’s larger bill combined a complete rewire with a new panel and changed service.
Where These Prices Come From
Checked October 25, 2026. Contractor ranges are local US project prices. Homeowner bills retain their original dates.
- Super Power Electric: same-amperage replacement and service-upgrade packages.
- Cob Services: Naperville panel and service-upgrade pricing.
- Electrical Safety Foundation: home electrical evaluation for EV charging.
- TexAgs homeowner accounts from November 2022, linked above.
I hope you can now see which parts of your electrical system the proposed work changes. Send a question about a US panel quote to costcheckr@gmail.com.


